Remote control – Ricoh Camera RDC-i700 User Manual
Page 70
68
The
symbol will be displayed on the LCD
monitor or LCD panel.
Note
• To cancel self-timer mode, press the
button again.
B
Decide the composition of the
picture, position the camera securely,
and press the shutter release button.
The self-timer LED will light and the self-timer
will start. The shutter will be released after
about 10 seconds. The self-timer LED will
start blinking about 2 seconds before the
shutter is released and the beep sound will
be heard.
The self-timer mode is canceled
automatically when the shutter is released.
Note
• If the flash is charging, the self-timer will start when charging is
completed.
• The focus is locked when the shutter release button is pressed.
Tips
Remote Control
To operate the camera from a remote position or when the camera is
fixed in one spot, use the optional remote control unit.