Ricoh Camera RDC-i700 - Manual (Page 74)

72
Changing the ISO Sensitivity
You can change the ISO sensitivity.
A
Set the mode dial to [ · · · ]
and press the MENU button.
B
Select [ISO SENSITIVITY].
C
Select the ISO sensitivity (AUTO, ISO
200 or ISO 400) and then select [OK].
D
Select [EXIT] to exit the menu display.
The ISO sensitivity will be displayed on the
LCD monitor.
E
Press the shutter release button to
take the picture.
Note
• Enable the keep settings mode to save the ISO sensitivity setting.
→
P.116 “Keep Settings”
ISO sensitivity display
when the DISPLAY button
is pressed. (Information
display
→
P.49)