Rosewill RNX-G400 User Manual
Page 26
Wireless Router
RNX-G40 User Manual
3.3.7 Wireless - Access Control
If you enable wireless access control, only those clients whose wireless MAC addresses are in the access
control list will be able to connect to your Access Point. When this option is enabled, no wireless clients will
be able to connect if the list contains no entries.
Screen snapshot - Wireless Access Control
Item Description
Wireless Access
Control Mode
Click the Disabled, Allow Listed or Deny Listed of drop
down menu choose wireless access control mode.
This is a security control function; only those clients registered in the access
control list can link to this WLANAP Router.
MAC Address
Fill in the MAC address of client to register this WLAN AP Router access
capability.
Comment
Fill in the comment tag for the registered client.
Apply Changes
Click the Apply Changes button to register the client to new configuration
setting.
- 25 -