Rosewill RNX-G400 User Manual
Page 35
Wireless Router
RNX-G40 User Manual
IV PPTP
Screen snapshot - WAN Interface Setup – PPTP
Item Description
PPTP
Allow user to make a tunnel with remote site directly to secure the data
transmission among the connection. User can use embedded PPTP client
supported by this router to make a VPN connection.
IP Address
If you select the PPTP support on WAN interface, fill in the IP address for it.
Subnet Mask
If you select the PPTP support on WAN interface, fill in the subnet mask for it.
Server IP Address
Enter the IP address of the PPTP Server.
User Name
If you select the PPTP support on WAN interface, fill in the user name and
password to login the PPTP server.
Password
f you select the PPTP support on WAN interface, fill in the user name and
password to login the PPTP server.
MTU Size
Fill in the mtu size of MTU Size. The default value is 1400. Refer to 4.23 What is
Maximum Transmission Unit (MTU) Size?
Attain DNS
Automatically
Click to select getting DNS address for PPTP support.
Set DNS Manually
Click to select getting DNS address for PPTP support.
DNS 1
Fill in the IP address of Domain Name Server 1.
DNS 2
Fill in the IP address of Domain Name Server 2.
DNS 3
Fill in the IP address of Domain Name Server 3.
Clone MAC Address
Fill in the MAC address that is the MAC address to be cloned. Refer to 4.24 What is
Clone MAC Address?
Enable uPNP
Click the checkbox to enable uPNP function. Refer to 4.22 What is Universal Plus
and Plav (uPNP)?
- 34 -