Rosewill RNX-G400 User Manual
Page 32
Wireless Router
RNX-G40 User Manual
Item Description
Static IP
Click to select Static IP support on WAN interface. There are IP address, subnet
mask and default gateway settings need to be done.
IP Address
If you select the Static IP support on WAN interface, fill in the IP address for it.
Subnet Mask
If you select the Static IP support on WAN interface, fill in the subnet mask for it.
Default Gateway
If you select the Static IP support on WAN interface, fill in the default gateway for
WAN interface out going data packets.
DNS 1
Fill in the IP address of Domain Name Server 1.
DNS 2
Fill in the IP address of Domain Name Server 2.
DNS 3
Fill in the IP address of Domain Name Server 3.
Clone MAC Address
Fill in the MAC address that is the MAC address to be cloned. Refer to 4.24 What is
Clone MAC Address?
Enable uPNP
Click the checkbox to enable uPNP function. Refer to 4.22 What is Universal Plus
and Plav (uPNP)?
Enable Web Server
Access on WAN
Click the checkbox to enable web configuration from WAN side.
Apply Changes
Click the Apply Changes button to complete the new configuration setting.
Reset
Click the Reset button to abort change and recover the previous configuration
setting.
II DHCP Client
Screen snapshot - WAN Interface Setup - DHCP Client
- 31 -