RCA 608WL - Manual (Page 102)

Chapter 4
Basic Configuration
E-DOC-CTC-20041126-0013 v1.0
100
Access control on the
SpeedTouch™
Following modes are available:
 New stations are allowed (automatically)
:
All New stations can access the SpeedTouch™ WLAN.
 New stations are allowed (via registration) :
Only allowed stations in the Access Control List (ACL) have access. You can
add new stations via registration.
For more information, see
“ Registering new wireless stations” on page 100
 New stations are not allowed :
Only allowed stations in the Access Control List (ACL) have access.
Registering new
wireless stations
Proceed as follows:
1 On the Office Network menu, click Devices.
2 Under Pick a task..., click Search for wireless devices.
3 The SpeedTouch™ searches for new wireless stations that use the encryption
key of the SpeedTouch™ Access Point.
4 The SpeedTouch™ takes you to the Office Network. The new station will be
shown next to the name of the SpeedTouch™ WLAN.
To view the device settings, click the name of the new station. For more
Information, see
“4.7.4 Wireless Device Settings” on page 96 .