Ricoh G1168604A - Manual (Page 12)

G1168605A_1.10 Copyright © 2004, 2005 12
Guide to the Printer
Exterior
1. Paper Size Dial
Adjust this dial to match the size and feed direction of the paper loaded in the paper tray.
2. Bypass Tray Extension
Pull out this extension to load paper into the Bypass Tray when its length is longer than
A4 L or 8
1 /
2
”
× 11”L.
3. Bypass Tray
Use to print onto thick paper, OHP transparencies, adhesive labels, custom size paper,
envelopes as well as plain paper. When printing on custom paper size, printer driver set-
tings are required.
Up to 100 sheets of plain paper (80 g/m
2 , 20 lb.) can be loaded.
See “Paper and Other Media Supported by this Printer” and “Loading Paper in the By-
pass Tray”, Maintenance Guide.
4. Output Tray Extension
Pull out this extension when printing on long paper.
5. Control Panel
Contains keys for the printer operation and a panel display that shows the printer status.
6. Output Tray (Standard Tray)
Printed output is stacked here with the print side facing down.
7. Paper Exit Cover
Open this cover to remove misfed paper.
8. Ventilator
This hole helps to keep components inside the printer from overheating.