Configuration, Ethernet configuration – Ricoh G1168604A User Manual
Page 80
G1168605A_1.10
Copyright ©
2004, 2005
80
Configuration
Ethernet Configuration
Make the following network settings according to the network interface you are
using.
You can use SmartDeviceMonitor for Admin or a Web browser to make IP ad-
dress-related settings in a TCP/IP-capable environment.
❒ Configure the printer for the network using the control panel.
❒ The following table shows the control panel settings and their default values.
These items appear in the [Host Interface] menu.
❒ If DHCP is in use, “IP Address”, “Subnet Mask”, and “Gateway Address” are
all set automatically.
❒ Make this setting only when it is necessary. See Software Guide.
A
Press the {Menu} key.
Setting Name
Value
DHCP
On
IP Address
011.022.033.044
Subnet Mask
000.000.000.000
Gateway Address
000.000.000.000
Frame Type (NW)
Auto
Active Protocol
TCP/IP
Active
NetWare
Active
SMB
Active
Apple-
Talk
Active
Ethernet Speed
Auto Select
LAN Type
Ethernet