Ricoh G1168604A - Manual (Page 48)

Installing Options
48
Attaching 1394 Interface Unit Type 4510
❒ The 1394 interface unit uses “IP over 1394” and “SCSI print”. Operating sys-
tem-compatible connection methods are as follows (IEEE 1394 cannot be
used with Windows 95/98 and Windows NT 4.0):
• Windows Me
“IP over 1394”
• Windows 2000
“SCSI print”
• Windows XP, Windows Server 2003
“IP over 1394”, “SCSI print”
❒ Under Windows 2000, the 1394 interface unit can only be used with Service
Pack 1 or later. The client cannot install the printer driver without using an ac-
count that has administrators access rights.
❒ Before touching the 1394 interface unit, ground yourself by touching some-
thing metal to discharge any static electricity. Static electricity can damage the
1394 interface unit.
❒ Do not plug or unplug the 1394 interface cable while installing the printer driv-
er.
❒ Use the 1394 interface cable that comes with 1394 interface unit.
A
Check the package contains the following:
❖ 1394 Interface Unit Type 4510
• Do not touch the inside of the controller board compartment. Doing so may
cause a malfunction or a burn.