Ricoh G1168604A - Manual (Page 38)

Installing Options
38
Attaching Paper Feed Unit Type 610
When installing multiple options, install the paper feed unit first.
❒ Do not slide more than one paper tray out at the same time. Having more than
one full paper tray fully extended could cause the machine to topple.
❒ More than two paper feed units cannot be attached.
❒ Check the printer nameplate to confirm the model code.
A
Check the package contains the following:
❖ Paper Feed Unit (including a paper tray)
B
Turn off the power of the printer, and then unplug the printer's power ca-
ble and the interface cable.
C
Remove the adhesive tape from the paper feed unit.
• The printer weighs about 20 kg (44.1 lb.). When lifting the machine, use the
inset grips on both sides. Otherwise the printer could break or cause injury
if dropped.