Radio Shack 15-1925 - Manual (Page 17)

Need help? Call 1-800-950-7044
17
Follow these steps to turn off punch-through.
1. Press the device key ( CBL or VCR ) for the
device you want to use to control the volume,
for example. Then press
SET UP until the red
light blinks twice.
2. Press 9 – 9 – 3 . The red light blinks twice.
Press the device key ( CBL or VCR ) for the
device you want to use to control the volume.
The red light blinks twice to indicate punch-
through is turned off.
To turn on the punch-through feature, press SET
UP – 9 – 9 – 3 – TV . The red light blinks twice to
indicate that punch-through is on.
USING THE SLEEP TIMER
If your original remote control had a sleep timer
function, your 6 in 1 IR/RF Remote Control’s
SLEEP key operates the same as on your original
remote.
Follow the instructions for the sleep timer function
in the owner’s manual from your original remote
control. Press
SLEEP in the exact same manner
as the original remote control’s SLEEP key was
pressed.
CONTROLLING LIGHTS AND
APPLIANCES
The Plug ’n Power feature allows you to control
lights and appliances, using the supplied RF com-
mand console along with an optional IR com-
mand console (RadioShack Unlimited No.
10037703). You also need Plug ’n Power light
modules and appliance modules (available
through your local RadioShack store) to use this
feature.
15-1925.fm Page 17 Monday, July 19, 1999 12:59 PM