Radio Shack HANDHELD TRUNKING 20-521 - Manual (Page 19)

19
A LOOK AT THE KEYPAD
Your scanner’s keys might seem confusing at first, but
this information should help you understand each key’s
function.
HOLD — holds the frequency search; holds on the cur-
rent ID in the trunk tracking mode.
SCAN — scans through the stored channels.
MAN (manual) — stops scanning and lets you directly
enter a channel number or frequency.
PROG (program) — stores frequencies into channels;
programs the trunking frequency, fleet map, and ID
memories.
TRUNK — switches between conventional and trunk
tracking.
LIMIT/SRC (search) — starts a limit search; searches a
specified frequency range to find frequencies; searches
for another active ID while trunk tracking.
— turns on or off the data signal skip feature;
moves through menu settings while trunk tracking.
PRIORITY/H/S (Hypersearch) — sets and turns on and off
the priority feature ; turns on and off Hypersearch.
L-OUT/S/S (search skip) — lets you lock out selected
channels or skip specified frequencies during a search;
lets you lock out a selected ID while trunk tracking.
KEYLOCK/ — locks the keypad to prevent acciden-
tal program changes; turns on the display light for 15
seconds.
DATA