Using the indoor temperature window – Radio Shack Weather Radio User Manual
Page 20
20
Operation
USING THE INDOOR
TEMPERATURE WINDOW
The weather station samples the indoor air
temperature about every 38 seconds. The
monitor shows both the current indoor tem-
perature and the dew point temperature in the
indoor temperature window (on the monitor).
You can display the temperature in degrees
Celsius (°C) or degrees Fahrenheit (°F).
Press
TEMP
. Then repeatedly press
UNIT
until
&
&
&
&
or
)
)
)
)
appears.
Notes:
• The monitor adjusts the unit of measure-
ment (Celsius or Fahrenheit) you see for
both the outdoor and indoor temperature
readings simultaneously.
• You can also view the indoor tempera-
ture from the thermo/hygro/baro sensor.
Viewing/Resetting MAX/MIN
Temperature Records
To toggle between the current indoor tem-
perature view and the maximum or minimum
indoor temperature view (recorded since the
last memory reset), press
TEMP
, then
repeatedly press
MEMORY
.
0$;
0$;
0$;
0$;
or
0,1
0,1
0,1
0,1
appears when the monitor shows
the maximum or minimum recorded tempera-
ture. The recorded times of the maximum or
minimum temperatures and
67$03
67$03
67$03
67$03
appear in
the
CLOCK
window.
To reset the temperature records in memory
and record a new maximum or minimum
temperature (beginning with the current
reading), hold down
MEMORY
for about 2
seconds.
Using the HI/LOW Temperature
Alarms
You can set the monitor to sound an alarm
when a set high or low indoor temperature is
reached.
Each time the temperature changes and
meets or exceeds a set high or low indoor
alarm condition, the current temperature and
+,
+,
+,
+,
or
/2
/2
/2
/2
flash, and the monitor sounds an
alarm for about 1 minute. To silence the
alarm sooner, press any key.
Note: If you press a key to silence the alarm,
the alarm stops sounding, but the current
temperature and
+,
+,
+,
+,
or
/2
/2
/2
/2
continue to flash
until that alarm condition is no longer met.
To view the current temperature and the cur-
rent high or low indoor temperature alarm
conditions, press
TEMP
, then repeatedly
press
ALARM
.
+,
+,
+,
+,
or
/2
/2
/2
/2
appears when the
monitor shows the high or low indoor temper-
ature alarm conditions.
Setting a HI/LOW Temperature
Alarm
1. Press
TEMP
.
2. Repeatedly press
ALARM
so
+,
+,
+,
+,
or
/2
/2
/2
/2
appears.
3. Hold down
SET
until the last tempera-
ture alarm condition flashes.
4. Repeatedly press (or hold down)
or
to set the temperature alarm.
5. Press
SET
to store the setting.
Note: The monitor automatically displays the
high temperature alarm setting after you set
the low alarm temperature, and vice versa.