Radio Shack Weather Radio - Manual (Page 6)

6 Preparation
Rain Gauge
Outdoor Thermo/Hygro Sensor
Indoor Thermo/Hygro/Baro Sensor
Solar Transmitter for Anemometer
Solar Transmitter for Rain Gauge/
Outdoor Thermo/Hygro Sensor (2)
Anemometer Base, Arm, and Vane Set
Wind Vane
Wind Cup
AC Adapter
Mounting Hardware
Tools/Additional Supplies Needed
for Installation
In addition to the supplied mounting hard-
ware, you need the following tools and sup-
plies to install your weather station:
• small flat screwdriver
• small Phillips screwdriver
• electric drill
• pencil
• compass
Number
Provided
Description
4 M3 × 17 Self-Tapping Screws
2 M3 × 12 Self-Tapping Screws
8 1 / 4 inch U-Bolts
16 1 / 4 inch Plain Washers
16 1 / 4 inch Hex Nuts
2 Rubber screw covers