Radio Shack Dual Keypad - Manual (Page 22)

22 Caller ID Operation
is disconnected.
JebZ JebZ JebZ JebZ 8kio 8kio 8kio 8kio
appears on
your phone.
JWa[ JWa[ JWa[ JWa[ C[iiW][ C[iiW][ C[iiW][ C[iiW][
— Send a waiting caller to
your phone company’s voice mail ser-
vice.
Je Je Je Je Le_Y[ Le_Y[ Le_Y[ Le_Y[ CW_b CW_b CW_b CW_b
appears on your
phone.
Note: Voice Mail is a service available
from some telephone companies. A call
for a subscriber can be kept at the tele-
phone company and retrieved later on
by calling the special number and enter-
ing the caller’s phone number and code
number. Check with your telephone
company to determine if this service is
available.
7dim[h%:hef 7dim[h%:hef 7dim[h%:hef 7dim[h%:hef ''''
— Disconnects the first
call, and connects automatically to the
new caller.
7dim[h%:hef 7dim[h%:hef 7dim[h%:hef 7dim[h%:hef 'ij 'ij 'ij 'ij
appears.
9ed\[h[dY[ 9ed\[h[dY[ 9ed\[h[dY[ 9ed\[h[dY[
— Allows you to speak with
your first and second callers to have a 3-
way conference call.
9ed\[h[dY[Z 9ed\[h[dY[Z 9ed\[h[dY[Z 9ed\[h[dY[Z
appears.
:hefý<_hij :hefý<_hij :hefý<_hij :hefý<_hij
and
:hefýBWij :hefýBWij :hefýBWij :hefýBWij
are options you
can only use with a conference call (see
“Using Conference”).
9Wbb 9Wbb 9Wbb 9Wbb :heff[Z :heff[Z :heff[Z :heff[Z
appears.
Using Ask to Hold
When you select
7ia 7ia 7ia 7ia je je je je >ebZ >ebZ >ebZ >ebZ
, you can then
use several of the other options as well.
1. If you decide you cannot end your first
call, and you do not want to continue to
leave the second call on hold, press
MENU .
To notify the second caller that you are
busy, scroll down to
J[bb J[bb J[bb J[bb 8kio 8kio 8kio 8kio
or press 2 .
To send the second caller to voice mail
(if you have voice mail), scroll down to
JWa[ JWa[ JWa[ JWa[ C[iiW][ C[iiW][ C[iiW][ C[iiW][
or press 3 .
Press SELECT/INTCM .
2. If you decide to take the second call,
and end the first, scroll down to
7dim[h% 7dim[h% 7dim[h% 7dim[h%
:hef :hef :hef :hef ''''
or press 4 .
Press SELECT/INTCM .
3. If you decide to include the second
caller in your conversation with the first
caller, scroll down to
9ed\[h[dY[ 9ed\[h[dY[ 9ed\[h[dY[ 9ed\[h[dY[
or press
5 .
Press SELECT/INTCM .
Using Conference
You can either begin a conference call as
soon as you receive a second call, or after
the second caller has been on hold for a
while (see “Using Ask to Hold”).
Once you have established a conference
call, you can end it at any time by dropping
one of the calls.
:hef :hef :hef :hef <_hij <_hij <_hij <_hij
— hang up on the first caller and
continue with the second.
:hef :hef :hef :hef BWij BWij BWij BWij
— hang up on the second caller
and continue with the first.
Follow these steps to drop one of the calls.
1. To end a conference call, press MENU .
2. Scroll down to
:hef :hef :hef :hef <_hij <_hij <_hij <_hij
(or press 6 ) or
:hef :hef :hef :hef BWij BWij BWij BWij
(or press 7 ) to drop the desired
call.
3. Press SELECT/INTCM .
9Wbb 9Wbb 9Wbb 9Wbb :heff[Z :heff[Z :heff[Z :heff[Z
appears.