Installation – Regency IG34-LPG User Manual

Page 17

Advertising
background image

17

Regency IG34 Gas Inbuilt Fireplace

INSTALLATION

10) Place the embers and Rockwool on the exposed front

burner tray.

9) Place Front Left Log G)02-44 onto the 2 front pins as

shown.

G)02-44

F)02-48

B)02-45

Bracket

A)02-43

Front edge of

rear burner

The bottom right edge of Log F)02-48 must sit snugly against

the bracket and the front edge of the rear burner.

Side View

11)

Separate platinum embers and place on and around
the embers and rockwool on the burner tray. Avoid
stacking platinum embers.

12) Test fi re to ensure proper light off (make sure fl ame

fl ows smoothly from one end of burner to the other. If
there is any fl ame hesitation, check that area for any
blockage of the burner port.

The "02" refer numbers (i.e. 02-43) are

molded into the rear of each log.

A) 02-43

D) 02-46

G) 02-48

C) 02-44

B) 02-56

F) 02-47

E) 02-45

Advertising
This manual is related to the following products: