Regency IG34-LPG - Manual (Page 19)

19 Regency IG34 Gas Inbuilt Fireplace
INSTALLATION
SCREEN INSTALLATION
Plinth Trim Option:
Plinth Trim Kits are an option that can be used to fi nish off the installation when the bottom of the fi replace is higher than the
hearth or to raise the fi replace.
1) Lay the faceplate side panels fl at, face down on something soft so they don't scratch.
2) Attach the Plinth Trim to the bottom of the faceplate side panels with the screws provided.
3) Install faceplate on unit - see next page.
1) Lay the faceplate panels fl at, face down on something soft so they don't scratch.
2) Take the top faceplate and align the holes in it with the holes in the side panels.
Secure with provided nuts and bolts.
1) Hook the screen over the top of the door frame - lower until
screen is fl ush with the door frame.
2) Flip door frame and screen over - locate the bracket tab at
the bottom of the door frame - fold the tab over 90º to secure
the screen in place.
3) Install screen and door frame on to unit - follow directions
on next page.
IG34 Faceplate Assembly / Plinth
1 336-914 Faceplate / Trim Kit
1 366-942 Plinth Kit (optional)
1 336-016 Mesh Screen Door
1 336-072F Mesh Bottom Screen
6 904-576 #8 Phillips pan head screws
1 336-012 Bottom Door
FACEPLATE & OPTIONAL PLINTH TRIM ASSEMBLY