Regency IG34-LPG - Manual (Page 20)

20 Regency IG34 Gas Inbuilt Fireplace
INSTALLATION
Note: Ensure that the fl anges on the sides of the fi rebox
are on the outside, when installing the faceplate
(see below).
Faceplate
Flange on fi rebox
Door Frame
Glass Door
Metal Lip
Openings on hinge
3) Fold down the 2 hinges on the bottom frame to a fl at
position.
The bottom frame is installed with a friction fi t - the
opening in the corner of each hinge slides over the
metal lip located on the fl oor of the unit.
Note: Ensure the bottom frame is positioned properly
before installing, by making sure there is equal spacing on
either side.
1) Position faceplate on unit lining up screw holes on
faceplate with screw holes on unit - secure with 4 screws.
2) Install lower screw below glass door - secure with 4 screws.
4) Push both bottom frame hinges down on the metal lip until
they are fully seated.
5) Flip bottom louver up to close.
6) Install the door frame by hooking the top fl ange over the
top of the glass door.
7) Lower the door frame gently into place.
8) To uninstall - reverse procedure.
Completed Faceplate & Door Frame Installation
with Safety Screen
FACEPLATE AND DOOR FRAME INSTALLATION