Olympus PT-027 - Manual (Page 41)

E-40
• Do not use adhesive for repairs or other purposes. When repair is
required, please contact a service station of our company or your dealer.
Q11: Please tell me about repairs.
A11: Please contact a service station of our company or your dealer, if repair
should be necessary. Do not try to repair, disassemble or modify the
Case yourself. Repair, disassembly or modification by you or third
parties not authorized by Olympus invalidates the guarantee.
Q12: What are the model names and prices of the accessories available for
use with the PT-027?
A12: The following accessories are available as options.
(1) O-ring for the PT-020/PT-027 (POL-020A, POL-020B, POL-020C):
Packing that must be attached to the O-shaped silicon rubber section
installed on the PT-027 to prevent water penetration. Three kinds of O-
rings are available but the O-rings designed for other cases cannot be
used except for those designed for the PT-020.
(2) O-ring for the PPO-02 standard port on the PT-027 (POL-101): Packing
that must be attached to the O-shaped silicon rubber section installed on
the case mount section of the standard port.
(3) Grease for silicon O-ring (PSOLG-1): Exclusive grease for maintenance
of the silicon O-ring.
(4) Silica gel (SILCA-5): Desiccant agent to reduce fogging of the glass
parts of the case due to condensation.
(5)LCD hood (PFUD-04): Hood that attaches to the LCD monitor window of
the protector to improve the view of the camera’s LCD monitor.
(6) Balance weight for the PT-020/PT-027 (PWT-020): Weight to give the
case to the neutral buoyancy in seawater. An environment-friendly
accessory that does not contain lead. It can also be used as the balance
weight for the PT-020.
❈ You can order in large computer shops and camera mass sale
stores.
❈ Please contact your dealer or a service station of our company when
replacement is required. Replacement will be made against payment.