Olicom A400A - Manual (Page 14)

12
2. Quick Setup
Gathering Configuration Information
Before you configure this ADSL router, you need to gather information
about your networks. Most users will only need to complete the Quick
Setup section.
For many users, the default configuration of the product will provide all
the necessary services. Some DSL service providers may require
settings that vary from the default configuration. In such cases, you
should contact the service provider or network administrator and have
them complete the Quick Setup.
Entering Basic Settings
The Quick Setup window lets you enter basic configuration information
for your ADSL router. If you have overridden the default settings for
IP address information and entered IP address information manually,
you can use the Quick Setup window to display and modify those
settings.
Quick Setup is an easy and quick way to set up this ADSL router and
let it connect/communicate with ISP to access Internet service. Before
configuring, you should read carefully the part of Installation and
configuration. You also need some information provided by your ISP
to proceed the ADSL router setup and configuration.
This ADSL router supports three kinds of protocol and provides five
kinds of operation mode.
To decide what kind of protocol, it depends on the structure and services
provided by your Internet Service Provider, please follow the instruction
of Quick Setup window to enter the parameter.
Note: Click the question mark in the title bar of the dialog box to view
on-line description about each field of the Graphic User Interface.