Olicom A400A - Manual (Page 21)

19
RFC 2364 PPPoA
The Framing PPP packet is encapsulated using RFC 2364 protocol
over an ATM network and this operation mode use PPP/ATM/ADSL to
make a PPP connection with ISP. The other side of PC or LAN can
follow this PPP connection to access Internet service.
1. VPI: Enter the number of the virtual path identifier in the VPI
field.
The VPI is a number in the range 0-255. Consult your ATM transport
administrator for what number you should enter in this field.
2. VCI: Enter the number of the virtual circuit identifier in the VCI
field.
The VCI is a number in the range 0-65534. Consult your ATM
transport administrator for what number you should enter in this field.
3. Encapsulate: Select the encapsulation setting.
You choose LLC or VC Mux to configure whether the virtual circuit
uses LLC-SNAP encapsulation or Vc-based multiplexing.
4. Account: Enter the account provided by your ISP in the Account
field.
5. Password: Enter the password provided by your ISP in the
Password field.