Olicom A400A - Manual (Page 17)

15
RFC 1483 bridge (EoA)
Bridged protocol data unit is encapsulated using RFC 1483 protocol
over an ATM network and this operation mode using ATM/ADSL to
execute as a Ethernet's bridge.
1. VPI: Enter the number of the virtual path identifier in the VPI
field.
The VPI is a number in the range 0-255. Consult your ATM transport
administrator for what number you should enter in this field.
2. VCI: Enter the number of the virtual circuit identifier in the VCI
field.
The VCI is a number in the range 0-65534. Consult your ATM
transport administrator for what number you should enter in this field.
3. Encapsulate: Select the encapsulation setting.
You choose LLC or VC Mux to configure whether the virtual circuit
uses LLC-SNAP encapsulation or Vc-based multiplexing.
4. Gateway: Use the Gateway Address field to specify the IP
address of the default IP gateway.
5. Remote DNS: Enter the IP address of your domain name server
in the Remote DNS field.
A domain name server is a network computer responsible for
matching host names to numeric IP addresses so that network traffic
can be routed correctly. Your Internet Service Provider can provide
the IP address of its domain name server.