Oki 5950 - Manual (Page 127)

|
Feature Set Guide: English 117
End User Information
Using the T.38 protocol for faxing is very similar to using
PSTN for faxing. This section covers the differences between
T.38 and PSTN faxing.
Be sure to refer to the User’s Guide for general information
about using your facsimile machine.
Requirements
To use T.38 protocol for faxing, you must
· communicate between two T.38-capable devices
· know the IP Address of the destination you are sending
to
· know if the IP Address is Global or Private
· have your Installer (Network Administrator) program
the Address Table via the Console Software
· know the alias assigned to the IP Address (get this from
your Installer [Network Administrator])
· enter the “#” symbol as the first character whenever
you input an alias for a T.38 facsimile communication.