Oki 5950 - Manual (Page 136)

|
OKIFAX 5750/5950 126
Determine the DHCP Setting
To determine if DHCP is ON or OFF, you can
· use the IPFax Console software
· print the Configuration Report
IPFax Console Software
1 Start the IPFax Console software.
On the desktop, select Start – Programs – IPFAX console.
2 Connect the software to the T.38 device you want to
work with.
3 Click Change.
4 From the top menu, select Network.
5 If the Use DHCP box is checked, DHCP is ON.
If the Use DHCP box is not checked, DHCP is OFF.
Printing the Configuration Report
1 Press Menu/Exit to enter the menu.
2 Press
ᮡ to select Report Print, press Enter.
3 Press
ᮢ orᮡ until the report you want appears on the
display. Press Enter.
4 Print all the reports you want, then press Menu/Exit to
return to standby mode.