Oki 5950 User Manual
Page 128
|
OKIFAX 5750/5950
118
Limitations and Suggestions
· You cannot combine T.38 and PSTN communications in
one fax transmission.
· You cannot send and receive T.38 faxes simultaneously.
If your machine is sending a T.38 fax, any data to be
received is ignored.
If your machine is receiving a T.38 fax, and you try to
send a fax, the data will not be sent until the receiving is
completed.
· When you program a One-Touch key with an alias for an
IP Address, program the alternate (back-up) number with a
standard PSTN (regular phone fax) number.
If the T.38 connection does not work, your fax will be sent
using the “regular” fax method, PSTN.
· To stop transmission, press STOP.
The transmission terminates immediately, without asking
for confirmation.
· You cannot chain dial using T.38.
· T.38 Internet fax data is sent nearly simultaneously to
being scanned. The document is not stored in memory.
· When the T.38 Internet fax board is installed in your
machine, Power Save does not work.
· If the remote T.38 device supports the Relay, Confidential,
and Polling functions, you can do them. Refer to the
User’s Guide for more information.