Oki 5950 - Manual (Page 59)

|
Feature Set Guide: English 49
5: POP SERVER NAME
Enter either the IP address or the host name of the POP mail
server.
! If the DNS name of the SMTP server does not work,
try entering the IP address of the SMTP server.
Restrictions
·
If DNS has been set, use the host name (e.g.,
mail.network.com).
·
If DNS has not been set, enter the IP address of the
server. The address must include the “.” (period)
dividers (e.g., 192.168.4.123).
·
up to 64 characters may be entered.
You may use Latin letters, numbers and symbols.
To enter symbols, use either one-touch key 20 or
key “0” of the numeric ten-key pad.
The symbols that can be used are: ! # & ’ ( ) * + , - . /
: ; = ? · @ ? ” _ % ~
The “~” (tilde) symbol shows on the display as “
-1 ”.
Both uppercase and lowercase letters can be used.
To change the case, press the CAPS key
(one-touch key 31).
6: POP USER ID
Enter the user ID registered on the POP3 server.
Restrictions
·
up to 16 characters may be entered.
You may use Latin letters, numbers and symbols.
To enter symbols, use either one-touch key 20 or
key “0” of the numeric ten-key pad.
The symbols that can be used are: ! # & ’ ( ) * + , - . /
: ; = ? · @ ? ” _ % ~
The “~” (tilde) symbol shows on the display as “
-1 ”.
Both uppercase and lowercase letters can be used.
To change the case, press the CAPS key
(one-touch key 31).