Optimus PROFFESIONAL SERIES STAV-3370 - Manual (Page 13)

13
Preparing Your Receiver
Using the AC Power Outlet Your receiver has an AC power outlet that you can use to power an electronic
device, such as a turntable, cassette deck, VCR, and so on. This switched out-
let turns on and off with the receiver and provides a maximum of 100 Watts.
Connecting to AC Power Before you plug in the receiver’s power cord, double check all other connec-
tions.
To power the receiver, plug the supplied power cord into a standard AC outlet.
The power cord’s plug is polarized and fits only one way.
Demonstration Display To see a demonstration of the receiver’s display, press and hold RETURN while
turning on power. The receiver cycles through several demonstration displays.
To exit the demonstration mode, press any key.
Caution: Do not connect appliances with
high power consumption, such as a
heater, iron, monitor, or TV, to this AC
outlet. Doing so can cause a risk of over-
heating and fire, and could damage the
receiver.
AC OUTLET
Warning: To prevent electric shock, do
not use this polarized plug with an exten-
sion cord, receptacle, or other outlet
unless you can fully insert the blades to
prevent blade exposure.
A
B
R L
R L
FRONT SPEAKERS AC OUTLET