Optimus PROFFESIONAL SERIES STAV-3370 - Manual (Page 18)

18
Cassette Deck/VCR Features
You can connect two cassette decks to the receiver. Selecting either VCR/TAPE
1 or TAPE 2 MONITOR lets you hear the playback from the cassette deck you
connected to the receiver’s corresponding ( VCR/TAPE 1 , TAPE 2 MONITOR )
jacks.
Using the VCR/TAPE 1
Button Press VCR/TAPE 1 . VCR appears on the display. You hear the playback from the
cassette deck or VCR you connected to the receiver’s VCR/TAPE 1 jacks.
Using the TAPE 2
MONITOR Button Press TAPE 2 MONITOR . TAPE 2 appears on the display along with the last
program source you selected. You can hear playback or monitor a recording
from the cassette deck you connected to the receiver’s
TAPE 2 MONITOR jacks.
The TAPE 2 REC jacks continue to output the previously selected source when
you press TAPE 2 MONITOR .
To return to the previous source, press TAPE 2 MONITOR again so TAPE 2 dis-
appears.
Notes:
• If you press TAPE 2 MONITOR when the cassette deck is neither playing
nor recording, the receiver mutes the current audio source. To hear the
audio source, press
TAPE 2 MONITOR until TAPE 2 disappears from the
display.
• Do not press TAPE 2 MONITOR while you are recording on the deck con-
nected to TAPE 2 REC . If you do, the recording is interrupted for about 1
second.
Recording a Program Source The receiver sends the audio program source you select— VCR/TAPE 1 , TAPE 2
MONITOR , LD , CD , TUNER , PHONO — to the VCR/TAPE 1 OUT (audio) and TAPE 2
MONITOR REC jacks.
The VOLUME control does not affect the level of the signal going to the tape
decks.