Oregon Scientific PE830 - Manual (Page 11)

10
EN
To turn the keypad lock ON / OFF, press and hold .
To reset the unit, remove and then re-insert the battery.
BATTERIES
appears when the battery is low and needs replacing.
Protect the environment by taking exhausted
batteries to authorized disposal stations.
1. Unscrew to open back cover.
2. Insert 1 CR2032 battery.
3. Place the cover back and tighten the screw.
PRECAUTIONS
This product is engineered to give you years of
satisfactory service if you handle it carefully. Here are a
few precautions:
• Do not subject the unit to excessive force, shock,
dust, temperature or humidity, which may result in
malfunction, shorter electronic life span, damaged
battery and distorted parts.
• Do not immerse the unit in water. If you spill liquid
over it, dry it immediately with a soft, lint-free cloth.
• Do not clean the unit with abrasive or corrosive
materials.
• Do not tamper with the unit’s internal components.
Doing so will invalidate the warranty on the unit and
may cause unnecessary damage. The unit contains
no user-serviceable parts.
• Only use fresh batteries as specified in the user’s
instructions.
• Due to printing limitations, the displays shown in this
manual may differ from the actual display.
• The contents of this manual may not be reproduced
without the permission of the manufacturer.
• Do not dispose this product as unsorted municipal
waste. Collection of such waste separately for special
treatment is necessary.
• Do not use rechargeable batteries with this product.
• Remove the batteries if storing this product for a
long period of time.
The technical specifications for this product and
the contents of the user manual are subject to change
without notice
PE830_EU_M_EN_R1.p65 2006.8.16, 4:47 PM 10