Oregon Scientific PE830 - Manual (Page 9)

8
EN
3. Press and hold SET to enter the setting mode.
4. Press / to change a value and SET to confirm
and move on to the next setting.
5. The setting sequence is:
• Hour
• Minute
• On / Off
To stop the alarm sound, press any key.
EXERCISE SCHEDULE REMINDER
Using SmartSync software, you can set up to 7 alarms to
remind you to exercise, allowing you to specify an activity
goal in steps, distance or calories.
To set a exercise reminder:
For detailed information on the steps needed to set the
reminder alarm, see the software Help file.
When a exercise reminder alarm sounds:
1. The unit will beep and
remind will flash on the
screen.
2. Press to view the preset activity goal type (steps,
distance or calories).
4. Press to toggle between your chosen day’s step,
distance and calorie display.
IMPORTANT At midnight all accumulated daily data
will be stored for a period of 7 days. Therefore, once a
memory has been stored for 7 days it is replaced with
new data from the 1
st day of the new week.
The bar at the bottom of the display will indicate
which day’s memory record you are looking at.
CLEAR ALL RECORDS
Press and hold RESET.
ALARM
When in the Clock Mode, press to toggle between the
Clock and Alarm Mode.
To set the alarm:
1. Press MODE to navigate to the Clock Mode.
2. Press to switch to
the Alarm Mode.
PE830_EU_M_EN_R1.p65 2006.8.16, 4:47 PM 8