Oregon Scientific PE830 - Manual (Page 8)

EN
7
To set timer:
1. Press MODE to
navigate to Timer
Mode.
2. Press and hold SET for 2 seconds to enter setting mode.
3. Press / to select countdown or count-up timer
and press SET. If the countdown timer is selected
you will need to set the hr:min:sec by pressing /
to change a value and SET to confirm.
To use timer:
• Press to start / stop the timer.
• Press and hold to reset the timer.
• Press repeatedly to view timer step, distance and
calories values.
When you are in the timer display, will show. If
you are in another mode, will flash to indicate the timer
is running.
MEMORY
The pedometer has a 7-day memory function. You can
view total weekly or daily step, distance and calorie
records.
VIEW TOTAL WEEKLY RECORDS
1. Press MODE to
navigate to Memory
Mode.
2. Press to toggle between the total weekly step,
distance and calorie display.
VIEW DAILY RECORDS
1. Press MODE to navigate to Memory Mode.
2. Press to enter the daily record display.
3. Press repeatedly until you reach the day you wish
to view. When you have selected the day you wish to
view, a 1-second display will show to advise you if
you reached that day’s target or not:
• Target achieved =
smiley face and high
beep sound.
• Target not achieved =
sad face and low beep
sound.
PE830_EU_M_EN_R1.p65 2006.8.16, 4:47 PM 7