Olympus C-40Zoom - Manual (Page 17)

17
Monitor indications
— Shooting information (Cont.)
9
Drive mode (P. 96)
● Displayed when the drive mode is set on the menus.
: Single-frame shooting : Sequential shooting
: AF Sequential shooting BKT : Auto-bracket
0
White balance (P. 112)
● Displayed when WB is set on the menus.
No indication: AUTO : Daylight : Overcast
: Tungsten light : Fluorescent
: One touch white balance
!
ISO (P. 110)
● Displays the ISO (AUTO, 100, 200 or 400) selected on the menus.
When set to AUTO, the ISO changes to 100 when the mode dial is set
to A/S/M. When AUTO is selected, the ISO is automatically increased in
low-light situations when the flash is not used. This is to prevent blurring
from camera movement.
@
Record mode (P. 105) TIFF/SHQ/HQ/SQ1/SQ2
● Displays the record mode selected on the menus.
#
Number of pixels (P. 106)
● Displays the number of pixels used for the resolution setting that is
currently selected.
$
Self-timer/remote control (P. 93 – 95)
● Displayed when self-timer/remote control shooting is activated.
: Self-timer shooting : Remote control shooting
SLOW1
2272x1704
Names of parts