Olympus C-40Zoom - Manual (Page 173)

173
Chapter 10
1 Turn off the camera’s power, then insert the card containing image
files to be transferred to the computer.
2 Open the camera’s connector cover.
3 Connect the square terminal of the USB cable to the USB connector
on the computer.
4 Connect the round terminal of the USB cable to the USB multi-
connector on the camera.
5 Turn on the camera. The computer
recognizes the camera as a new
device.
● When using Windows 2000
Professional/Me
The USB driver will be automatically installed. Click “OK” when a
message saying that the installation is complete appears. The camera is
displayed as “Removable Disk” in either “My Computer” or “Explorer”.
● When using Windows 98/98 SE
The computer recognizes the camera as a new device, and a window to
install the USB driver appears. Press “CANCEL” to close this window.
Disconnect the camera from the computer, and install the USB driver as
shown in the provided “SOFTWARE INSTALLATION GUIDE”. If the
USB driver is already installed, this window will not appear.
● When using Mac OS 9.0–9.1
The computer recognizes the camera automatically and an “Untitled”
icon appears on the desktop.
Transferring images to a computer
(Cont.)
The camera and a computer can be connected with the provided exclusive
USB cable.
Personal computer
USB cable
Camera’s multi connector (USB)
Round terminal Rectangular terminal
Connecting the camera to a computer