Olympus C-40Zoom - Manual (Page 156)

156
Chapter 8
Pixel Mapping
The Pixel Mapping feature allows the camera to check a CCD and image
processing circuit automatically. It is not necessary to operate this function
frequently. Approximately once a year is recommended. Wait a few minutes
after the monitor is used or continuous shots are taken to allow for proper
performance of the Pixel Mapping function.
1 In the top menu, select MODE MENU
T SETUP T PIXEL MAPPING.
2 Press í.
● START appears.
SETUP
CAM
CARD
PIC
3MIN MIN
ON ON
RESET RESET
REC VIEW REC VIEW
SLEEP SLEEP
FILE NAME
PIXEL MAPPING PIXEL MAPPING
MY MODE SETUP MY MODE SETUP
3 Press .
● A progress bar appears during Pixel
Mapping.
● When Pixel Mapping is finished, the
screen returns to normal.
SETUP
CAM
CARD
PIC
REC VIEW REC VIEW
SLEEP SLEEP
FILE NAME
PIXEL MAPPING PIXEL MAPPING START
MY MODE SETUP MY MODE SETUP
● If the power is turned off during Pixel Mapping, start again from Step 1.
● To shoot in the
mode or to play back, perform Pixel Mapping in
another mode.