Olympus CAMEDIA P-200 - Manual (Page 43)

Note
• When you use a card that
contains images captured
by a different camera, the
frame numbers
displayed by your
camera may not
correspond with the ones
shown by the printer. To
make sure that the
printer prints the correct
image, use the index
print function (see page
33). Or, if your camera
can display file names,
switch the printer's
control panel to file name
display to select the
image to be printed (see
page 27).
Cautions
• If SmartMedia cannot be
inserted easily, do not
force it in, but remove it,
check the SmartMedia
insertion orientation and
retry insertion from the
beginning.
• The image recorded in
SmartMedia should be
printed as it was
recorded using an
Olympus digital camera.
Proper display and
printing performances
are not guaranteed for
images that have been
retouched and saved on
a PC or that have been
recorded with another
brand of digital camera.
Press and hold the POWER button of the printer for
more than 1.5 seconds to turn the printer ON.
The printer generates a beep tone and the control
panel is displayed.
(The FRAME number indicator appears when the
printer is turned ON.)
<Power ON> (without any card)
Opening the card cover
Open the card cover by hooking your finger on the
finger hook at the center of the card cover.
To close the card cover, push the top surface of the
card cover lock.
To open To close
Inserting the card into the printer's
slot
Inserting a SmartMedia into the printer
To print images stored in SmartMedia, open the card
cover and insert the card in the SmartMedia slot.
The ACCESS/CHARGE indicator on the operation
panel blinks while the SmartMedia is accessed and
turns off when the image has been loaded in the
printer. The control panel also shows the card type
(SmartMedia) and the frame number of the last
recorded image.
Basic Printing
2
1
• Never attempt to insert
or remove SmartMedia
while the ACCESS/
CHARGE indicator on
the operation panel is
blinking. Doing so could
destroy the card's
formatting, making it
unusable.
Notes
• Always use 3 V (3.3 V)
SmartMedia with a
capacity of 2, 4, 8, 16, 32
or 64 MB.
24