Olympus CAMEDIA P-200 - Manual (Page 8)

Insert the floppy disk into the PC's floppy drive and select [Use
disk].
Set the floppy disk drive as the [Copy source of distributed file.]
The drive name of the floppy disk drive varies depending on the setup of
each PC. Check your PC's instruction manual if you are not sure.
When you find the file, go on to the next step.
Set [LPT1: Printer port] as the port to be used by the printer.
Select whether the printer is used as the default printer or not.
Click [End] to complete installation.
4
5
6
7
Note
When "Insert Windows CD-ROM (or floppy disk)" is displayed during installation, insert
the specified CD-ROM or applicable floppy disk in the PC and click [OK], The required
file will be installed automatically. If Windows setup is started when the Windows CD-
ROM is inserted, cancel the Windows setup. The installation of the printer driver will
continue.
9