Dot by dot, Scrolling the theaterwide, Picture – OxiBrands Integrated High Definition LCD Television 40E220U User Manual
Page 68: Theaterwide 2 and 3 only), Picture (theaterwide 2 and 3 only)
68
Using the TV’s features
Scrolling the TheaterWide® picture (TheaterWide 2 and 3 only)
Dot by Dot
This setting is for viewing VGA, SVGA, XGA, WXGA, and
SXGA sources.
(Sample Illustration) Picture size - Dot by Dot
Dot by Dot is a non-scaling display. Depending on the input signal
format (VGA, for example) the picture may appear with sidebars
and/or bars at the top and bottom.
Scrolling the TheaterWide
®
picture
(TheaterWide 2 and 3 only)
You can set separate scroll settings for the TheaterWide 2 and
TheaterWide 3 modes for each input.
To set the scroll settings:
1
Press the MENU button and open the Picture menu.
2
Highlight Theater Settings, and then press the ENTER
button.
(Sample Image) Picture menu - Theater Settings selection
3
In the Picture Size field, select either TheaterWide 2 or
TheaterWide 3
You cannot scroll in any other mode.
4
Press the ( arrow) button to select the Picture Scroll field.
5
Press the ( / arrow) buttons to scroll the picture up and
down as needed.
NOTE