OxiBrands Integrated High Definition LCD Television 40E220U - Manual (Page 93)

93 Using the TV’s features
Using the Media Player
❖ Gently insert the USB device into the port and do not remove
while viewing Media Player.
❖ USB device: USB Mass Storage Class device (MSC)
❖ Connectivity is not guaranteed for all devices.
❖ Connect the USB device to the TV directly.
❖ Do not use a USB Hub.
❖ You must obtain any required permission from copyright owners
to use copyright content. Toshiba cannot and does not grant
such permission.
❖ Depending on the file size and amount in your USB storage
device, it may take some time to load before content is viewable.
A message will display on-screen when files are loading from
the USB storage device.
❖ Only limited types of U3 USB device are supported. Therefore, it
is suggested that you not use U3 USB with Media Player.
❖ Non-supported characters will be replaced with a square.
Auto Start function
When Auto Start is enabled, you will be asked if you want to start
the Media Player when a USB device is inserted. If Auto Start is
disabled, you must manually start the Media Player from the menu.
To change the Auto Start setting:
1 Press the MENU button and open the Setup menu.
2 Press the ( arrow) button to select Media Player, and then
press the ENTER button.
3 Press the ( / arrow) buttons to highlight Auto Start.
4 Press the ( / arrow) buttons to select On or Off.
To open the Media Player
Auto Start:
1 Gently insert a supported USB storage device to the USB port
on the side of the TV. A prompt will appear.
If you repeatedly insert and remove the USB connector, the prompt
may not appear.
NOTE
NOTE