OxiBrands Integrated High Definition LCD Television 40E220U - Manual (Page 90)

90 Using the TV’s features
Using the PC settings feature
To unlock the control panel, select Off in Step 5 in this section or
press and hold the VOLUME- button on the TV control panel for
approximately 15 seconds until the volume icon appears.
Using the PC settings feature
You can view an image from a PC on the TV screen. When a PC is
connected to the TV's PC IN terminal, you can use the PC Settings
feature to make adjustments to the image. If the edges of the picture
are cut off, readjust the Horizontal Position and Vertical Position. If
the picture is affected by interference, readjust the Clock Phase and
Sampling Clock.
To adjust the PC settings:
1 Repeatedly press the INPUT button to select PC Input mode,
see
“Selecting the video input source” on page 54 .
2 Press the MENU button and open the Setup menu.
3 Press the ( / arrow) buttons to select PC Settings, and then
press the ENTER button.
(Sample Image) Setup menu - PC Settings selection
If a computer is not connected or there is no PC input signal, this
feature will be grayed out in the Setup menu.
4 Press the ( / arrow) buttons to select an item.
5 Press the ( / arrow) buttons to make the appropriate
adjustments.
(Sample Image) PC Settings - adjustments screen
NOTE