Using the auto aspect feature – OxiBrands Integrated High Definition LCD Television 40E220U User Manual
Page 69
69
Using the TV’s features
Using the Auto Aspect feature
6
To save the new settings, highlight Done, and then press the
ENTER button.
To revert to the factory defaults, highlight Reset and then press
the ENTER button.
The adjustment range is from -5 to +10.
Using the Auto Aspect feature
When this feature is set to On, the TV will automatically select the
picture size when one of the following input sources is received:
❖
A 480i, 480p, 720p, 1080i digital signal from the
ANT/CABLE input
❖
A 480i signal from the ColorStream HD or Video input
❖
480i, 480p, 720p, 1080i, 1080p, or VGA (60Hz) signal from
the HDMI 1 or HDMI 2 input.
The auto aspect ratio feature is not applicable to the PC input.
To turn on the auto aspect ratio feature:
1
Press the MENU button and open the Picture menu.
2
Highlight Theater Settings, and then press the ENTER
button.
3
In the Auto Aspect Ratio field, select On.
4
To save the new settings, highlight Done, and then press the
ENTER button.
To revert to the factory defaults, highlight Reset and then press
the ENTER button.
To turn off the Auto Aspect ratio feature, Select Off in step 3 above.
Aspect Ratio of Signal Source Automatic Aspect Size (automatically selected
when Auto Aspect is On)
4:3 Normal
4:3
4:3 Letter Box
TheaterWide 2
16:9 Full
Full
Not defined (no ID-1 data or
HDMI
®
aspect data)
The current picture size you selected, see
NOTE