Installation, Adjusting the projected image, Adjusting the projector’s height – Optoma HIGH-END User Manual
Page 25
Advertising
![background image](/manuals/206135/25/background.png)
Installation
23
English
Adjusting the Projected Image
Adjusting the Projector’s Height
Tilt-Adjustment Feet
Elevator Feet
The projector is equipped with elevator feet for adjusting the
image height.
To raise the image:
1. Press the elevator button
.
2. Raise the image to the desired height angle
, then release
the button to lock the elevator feet into position.
3. Use screw in feet
to fi ne-tune the display angle.
To lower the image:
1. Press the elevator button.
2. Lower the image, then release the button to lock the
elevator feet into position.
3. Use screw in feet
to fi ne-tune the display angle.
Elevator Button
2
3
1
Advertising