Optoma HIGH-END - Manual (Page 63)

Appendices
61
English
Min.
610.60mm (24.04")
/ Max.
850.60mm (33.49")
410.99mm
(16.18")
185.00mm (7.28")
106.00mm (4.17")
310.62mm (12.23")
200.00mm
(7.87")
100.00mm
(3.94")
82.50mm
(3.25")
(3.25")
82.50mm
 Please note that
damage resulting from
incorrect installation
will invalidate
the warranty.
Ceiling Mount Installation
1. To prevent damaging your projector, please use the ceiling
mount package for installation.
2. If you wish to use a third party ceiling mount kit, please
ensure the screws used to attached a mount to the projector
met the following specifi cations:

Screw type: M4

Maximum screw-thread length into the projector: 10mm

Minimum screw-thread length into the projector: 8mm
Warning:
1. If you buy the ceiling
mount from other
company, please ensure
that there is at least
10cm distance between
the bottom cover of
the projector and the
ceiling.
2. Avoid placing the
projector near sources
of heat such air-con-
ditioning units and
heaters otherwise it
may overheat and shut
down automatically.