Optoma HIGH-END - Manual (Page 42)

User Controls
40
Color Temperature
The HD81-LV comes with three color temperature presets. The user
can switch between the presets to achieve the desired image.
1) Enter the Advanced menu as detailed in the previous
section.
2) Use “ ”, “ ” to highlight the “Color Temp” adjustment
item, and press “Enter” or “ ” to select.
Edge Enhancement
There are 5 pre-set modes and one user mode for advanced edge
enhancement fi lter. You can easily switch between the modes to
achieve different effects.
1) Use “ ”, “ ” arrow keys to select the “Edge
Enhancement” adjustment item, and then press “Enter”
key or “ ” key to enter this adjustment item. The Menu
disappears and a small adjustment bar is shown (as shown
below).
2) Use “ ”, “ ” arrow keys to select default modes.
3) Use “ ”, “ ” arrow keys to select default modes.
4) For User mode adjustment, put cursor on “User”, and press
“Enter” to select this adjustment item.
5) Use “ ”, “ ” to highlight the desired adjustment items,
then press “Enter” or “ ” to select it. The Menu disappears
and only an adjustment bar appears.
6) Use “ ”, “ ” arrow keys to adjust image.
3) For User mode adjustment, put cursor on “User”, and then
press “Enter” key to enter this adjustment item. The Menu
disappears and a sub adjustment menu is shown (as shown
below).
4) Use “ ”, “ ” arrow keys to select and choose “Edge
enhancement” bar, and then press “ ”, “ ” arrow keys to
adjust different enhancements.