Optoma HIGH-END - Manual (Page 38)

User Controls
36
5) Once you select Format 1 or 2 on the “Display” menu, any
other adjustments to the display that are made can be saved
upon exiting the “Display” mode. A reminder window will
appear asking for confi rmation.
6) User can save settings in the Format 1, 2, or choose “Exit/
Not Saved” to remove the settings. Once the user selects
“Not Saved”, the settings are still temporary and kept until
user changes the aspect ratio, signal/channel or HD81-LV
restart.
Image Shift Adjustment
The HD81-LV has the ability to adjust the image position and size to
optimize its location on your display by using both an Image Shift and
Overscan feature.
The function Image Shift can shift the input image up, down, left and
right, up to 100 pixels in each direction with Format 16:9, LBX, Format
1. (*)
1) Press the “Menu” button on the remote.
2) Use “ ”, “ ” to highlight the DISPLAY category, press
“Enter” or “ ” to select this category. Use “ ”, “ ” arrow
keys to highlight the “Image Shift” adjustment item.
3) Press “Enter” or “ ” to enter this adjustment item. A small
adjustment bar is shown, and the user may use the “ ”,
“ ”, “ ” and “ ” keys to move the image to best fi t the
display device screen.
4) Press the “Shift” button on the remote control to vertically
shift the image as well. No horizontal shift is possible from
the remote control.
 (*): You can use
format setting change
format 2 as 16:9 or
LBX, then format can
support image shift
function, too.
16:9 4:3 Native LBX Format 1
(Default 16:9)
Format 2
(Default 4:3)
Edge Masking O O O O * *
Overscan O O X O Step 2 Step 2
Image Shift O X X O O X
O : Available
X : Not Available