Optoma HIGH-END - Manual (Page 37)

User Controls
35
English
 Auto235: When Anamorphic Lens set as “Fixed” or
“Movable”, the default format will become “Auto235” that
replace original format “Native”. (See page 46)
“Auto235” is one kind of format name, and will detect
automatically the source is 2.35:1 fi lm source or not.
If the source is 2.35:1 source, the format will automatically
use format “16:9” to display.
If the source is non-2.35:1 source, the format will
automatically use format “4:3” to display.
Auto235 mapping rule
Input
source
When Anamorphic Lens set as... Discrete
IR button
Fixed Movable
2.35:1 Format Format
12V
Trigger
(Program-
mable)
Native (*)
Resize image
to 1920 x 1080
Resize image
to 1920 x 1080
0V (off)
Non-
2.35:1
Resize image
to 1440 x 1080
Resize image
to 1440 x 1080
12V (on)
 (*): When Anamorphic Lens set as “Fixed” or “Movable”, the format
“Native” will keep use the name on remote and RS-232 command,
but OSD will show “Auto235”. This also means programmable “12V
Trigger” doesn’t work when Anamorphic Lens set as “Movable”.
1) Press the “Menu” button on the remote.
2) Use “ ”, “ ” to select DISPLAY category and press “Enter”
or “ ”, then use “ ”, “ ” to highlight the “Format”
adjustment item.
3) Press “Enter” or “ ” to select this adjustment item. The Menu
disappears as shown.
4) Use “ ”, “ ” arrow keys to choose the desired format.
 When Anamorphic
Lens set as “None”
 When Anamorphic
Lens set as “Fixed” or
“Movable”