Olympus C-3020 Zoom - Manual (Page 112)

112
Chapter 5
Panorama shooting (Cont.)
5 Press to finish panorama shooting.
● Frames on the edges of the screen disappear, and the camera returns
to the normal shooting mode.
● During panorama shooting, the flash is disabled.
● The Panorama mode is only available with the OLYMPUS CAMEDIA-brand
SmartMedia cards.
● The camera itself cannot edit panorama pictures. To connect each picture,
the CAMEDIA Master software that comes with this camera is required.
● Your computer’s memory may be insufficient to perform the panorama
editing if you take too many panorama pictures in the HQ/SHQ modes.
● Images are saved in JPEG format when panorama shooting is done in the
TIFF mode.
● If the mode dial is moved during panorama shooting, the camera cancels
the panorama mode and returns to normal shooting.
Setting limitations and Default settings (Panorama shooting)
The setting for the Panorama shooting differs depending on the shooting
mode concerned as shown below.
Mode dial
(Mode menu)
P
A/S/M/
Setting limitation
Available
Factory default setting
(–: No setting)
–
Panorama shooting does not work in the Movie mode.
S-Prg
Available –
Panorama shooting does not work in
the A/S/M/ mode.