Olympus C-3020 Zoom - Manual (Page 20)

20
3 Press í on the arrow pad to select
MODE MENU.
● In this step and the following steps, the
screens show examples of the menus
displayed in the P mode.
4 Press ñ to select SETUP, then press í .
● The items in the SETUP menu appear.
5 Press Ññ to select , then press í .
● The screen appears.
DRIVE
WB
MODE MENU
Chapter 1
Date/time setting
It is possible to set the date/time of the built-in clock. Since the date/time is
saved with recorded pictures, be sure to set it correctly.
1 Set the mode dial to one of
shooting positions (P,
A/S/M/
or S-Prg).
● Be sure to remove the lens cap
beforehand since the lens
automatically extrudes.
● The mode also allows you to
set the date/time as long as the
card has one or more images
recorded on it.
2 Press to display Menu
(P. 46).
● The monitor turns on
automatically.
m
SETUP
CAM
CARD
PIC
CUSTOM BUTTON
SHOR SHORT CUT T CUT
m/ft
’01.01.01
00:00
SETUP
CAM
CARD
PIC
LOW LOW
ON ON
ON ON
RESET RESET
REC VIEW
MY MODE SETUP MY MODE SETUP
FILE NAME FILE NAME
ALL RESET
How to use this manual
The instructions in this manual use a series of numbers for each operating
procedure and button/dial illustration. Follow these numbers in order when
operating the camera.
Example 1
Set the mode dial to the position shown in the illustration. (In
this example, you would set P. )
Means “Press
this button”.
С
,
с
,
Й
and
í
used in instructions correspond
to the buttons on the arrow pad as shown.
(In this example, you would press the right-arrow
key on the arrow pad.)
С
с
Й н
If a button is
shown in black,
press it as part
of the step.
(In this
example, you
would press
right-arrow key.)