Olympus C-3020 Zoom - Manual (Page 99)

99
Chapter 5
Sequential shooting (Cont.)
Under some conditions, you may obtain better results shooting with exposure
compensation than by using the exposure setting considered optimal by the
camera. When Auto bracket is set, exposure is changed automatically for
each frame by keeping the shutter button pressed. The exposure differential
can be selected in the menus. Focus and white balance are locked at the first
frame.
Auto bracketing — Shooting pictures sequentially with
a different exposure for each frame
Ex: When BKT is set to ±1.0, x3
1 In the top menu, select MODE MENU T CAMERA T DRIVE T BKT,
then press
í
.
2 Press
Ññ
to select the exposure
differential between each frame (±0.3,
±0.7, ±1.0), then press
í
.
3 Press
Ññ
to select the number of
frames to shoot (x3, x5), then press .
● In some combinations of picture size and
record mode (NORMAL/HIGH), only x3 is
available.
BKT BKT
CANCEL SELECT GO
0.3
0.7
x3
x5
1.0
BKT BKT
SELECT GO
0.3
0.7
x3
x5
1.0
~
Continued on next page