Olympus C-3020 Zoom - Manual (Page 17)

17
Monitor indications
— Shooting information (Cont.)
!
Drive mode (P. 98)
● Displayed when the drive mode is set on the menus.
: Single-frame shooting, : Sequential shooting, : AF
Sequential shooting, : Self-timer shooting, BKT : Auto-bracket
@
Spot metering/Macro mode (P. 102, 107)
● Displayed when the Spot metering/Macro mode is selected by pressing
the (Macro/Spot) button.
No indication: Digital ESP (factory default setting), : Spot metering,
: Macro, : Spot metering+Macro
#
White balance (P. 122)
● Displayed when WB is set on the menus.
No indication: AUTO, : Daylight, : Overcast, : Tungsten light,
: Fluorescent, : One touch white balance
$
ISO (P. 118)
● Displays the ISO (AUTO, 100, 200 or 400) selected on the menus. Even
if AUTO is selected, the ISO changes to 100 when the Mode dial is set
to A/S/M/
. Even if AUTO is selected, the ISO is automatically
increased when the flash is not used in low-light situations in order to
prevent blurring due to camera movements.
%
Flash mode (P. 88–91)
● Displayed when the flash mode is selected by pressing the
(flash
mode) button.
No indication: Auto-flash, : Red-eye reduction flash, : Fill-in flash,
SLOW1/ SLOW2/ SLOW1: Slow synchronization flash, : Off
(flash override)
SLOW1
AEL
HQMF
Names of parts