Olympus C-3020 Zoom - Manual (Page 125)

125
Chapter 6
White Balance (Cont.)
White Balance Adjustment
This function allows you to make minute changes to the white balance.
In the top menu, select MODE MENU T
PICTURE T
, then press í.
The white balance adjustment indicator
appears on the screen.
The color becomes bluer each time you press
Ñ, and redder each time you press ñ,
depending on the original white balance
conditions. Press
to save your
adjustment.
screen
White balance adjustment
indicator
BLUE
RED
CANCEL ADJUST GO
Setting limitations and Default settings (White balance adjustment)
The setting for the White balance adjustment differs depending on the
shooting mode concerned as shown below.
Mode dial
(Mode menu)
S-Prg
P
A/S/M/
Setting limitation
(–: Not available)
–
Factory default setting
Adjustable throughout the
range of RED to BLUE.
ע0
● No selection other than the default setting ע0 is available for the S-Prg
mode. For P and A/S/M/ modes, the setting can be adjusted throughout
the range of RED to BLUE. However, the change in one shooting mode is
forcibly applied to other shooting modes except for
mode.
● For
mode, the setting can be changed separately from other shooting
modes.